Manufacturing, metal processing and metal fabrication shops

Employee protection in manufacturing and metalworking

In manufacturing, metal processing and metal fabrication, moving machine parts, heavy loads, noise, welding fume and metalworking fluids come together. Many duties therefore concern the technical safeguards on the machine and the rules for setting, maintenance and fault clearance.

Typical hazards and your duties

This overview lists the duties that apply most often in this industry, each with its reference in Austrian law. It does not replace identifying and assessing the hazards in your own business (§ 4 ASchG).

Danger points on machines

Crushing, shearing, cutting and drawing-in points on tools, drives and moving workpieces are the typical hazard on lathes, milling, bending and punching machines.

  • Safeguard danger points on moving parts primarily with enclosures, covers or barriers that prevent contact with the danger point. § 43 Abs. 3 AM-VO
  • Use machines only with the intended protective and safety devices and use these as intended. If a protective device does not work or damage is found that could impair safety, the machine must not be used. § 35 Abs. 1 Z 3 bis 5 ASchG
  • Have power-operated presses, punching machines and injection moulding machines with manual loading or unloading inspected periodically at least once every calendar year, at intervals of no more than 15 months. § 8 Abs. 1 Z 22 AM-VO

Setting, fault clearance and maintenance

Anyone trying to clear a fault quickly is tempted to reach into a running machine. That is why separate rules apply to this work.

  • Do not carry out setting, servicing, maintenance or cleaning work or clear faults on work equipment that is in operation. Prevent unintentional, unauthorised or accidental switching on by suitable measures. § 17 Abs. 1 AM-VO
  • Allow only specifically assigned employees to use hazardous work equipment. Repair, modification, maintenance, cleaning and servicing only by specifically authorised persons who have received special safety training. § 36 Abs. 2 ASchG
  • Where necessary, provide written operating instructions and display them at the workplace. § 14 Abs. 5 ASchG

Cranes, hoists and lifting accessories

Overhead cranes, jib cranes and chain hoists move heavy workpieces over workstations and traffic routes.

  • Only employees who prove their specialist knowledge by a certificate may operate cranes. § 2 Z 1 lit. a FK-V
  • Exceptions include manually operated cranes and floor-controlled cranes with a load capacity of no more than 50 kN. § 3 Abs. 1 Z 1 und 2 FK-V
  • Draw up written operating instructions for the use of cranes, covering among other things picking up, moving and setting down loads and communication between slinger, banksman and crane operator. § 19 Abs. 1 AM-VO
  • Have cranes, other power-operated lifting equipment, load-handling attachments and lifting accessories inspected periodically at least once every calendar year, at intervals of no more than 15 months. § 8 Abs. 1 Z 1, 2 und 13 AM-VO

Noise

Grinding, straightening, punching and compressed air cause noise that can damage hearing in many workshops.

  • Design work processes and workstations so that noise exposure is reduced to the lowest level that is reasonable in practice, where possible directly at the source. § 65 Abs. 1 ASchG
  • If the exposure action value of 80 dB (LA,EX,8h) is exceeded, hearing protection must be made available. § 4 Z 3 und § 14 Abs. 1 VOLV
  • In areas where the exposure limit value of 85 dB (LA,EX,8h) is exceeded, employees must wear suitable hearing protection. These areas must be marked. § 3 Abs. 1 Z 3 und § 14 Abs. 1 und 3 VOLV

Welding, cutting and welding fume

Welding and flame cutting produce fume, gases and sparks. Gas cylinders bring a risk of fire and explosion.

  • Fully capture hazardous gases, vapours or airborne particles such as welding fume at the point of origin, as far as the state of the art allows, and remove them safely. If full capture is not possible, provide additional ventilation. § 43 Abs. 2 Z 5 und 6 ASchG
  • Prevent fire and explosion hazards in oxy-fuel welding and cutting, for example by securing gas cylinders against falling over and excessive heating and by keeping oxygen fittings free of grease. § 26 Abs. 1 und 2 AM-VO
  • Provide safety training for oxy-fuel welding and cutting every year, covering among other things cylinder changes and what to do in the event of a flashback or cylinder fire. § 26 Abs. 4 AM-VO

Metalworking fluids, oils and cleaning agents

Metalworking fluids, cutting oils and degreasers affect the skin and the respiratory tract.

  • For all working substances, establish whether they are hazardous, determine their properties and assess the hazards, in particular on the basis of the information provided by manufacturers or importers. § 41 Abs. 1 und 2 ASchG
  • Take protective measures in the prescribed order of priority: limit the quantity, the number of employees affected and the duration of exposure, avoid contact through the work process, and use personal protective equipment only as the last step. § 43 Abs. 2 ASchG
  • Provide safety training for employees whenever new working substances are introduced. § 14 Abs. 2 Z 4 ASchG

Legal status: 21 October 2026. All references have been checked against the wording in Austria's Federal Legal Information System (RIS).

Support for your business

LEMCON.TECH works remotely for this: by video call and e-mail. This way you receive specialist support without anyone having to travel.

available

Safety training videos (subscription)

Comprehension questions for your safety training show whether it was understood (§ 14 Abs. 4 ASchG); making sure of this remains your task as the employer. Your safety briefing record supports your documentation, because safety training must be provided in a verifiable way (§ 14 Abs. 1 ASchG). The videos do not replace safety training at the specific workplace (§ 14 Abs. 3 ASchG).

  • Ladders and steps from €99.00 net Enquire now
  • Lifting and carrying from €99.00 net Enquire now
  • Slips, trips and falls from €99.00 net Enquire now
  • Fire safety and what to do in a fire from €99.00 net Enquire now
  • Initial safety briefing for new and agency workers from €99.00 net Enquire now
  • Hazardous substances from €99.00 net Enquire now

Further topics:

  • Personal protective equipment
  • Using electrical equipment safely
  • First aid and emergencies
  • Skin protection and wet work
  • Safety briefing for contractors
  • Display screen work
  • Violence and assault at work
in preparation – enquire now
More about the safety training videos
available

Operating instructions for Austria and Germany

Written operating instructions for your work equipment and working substances, for display at the workplace (§ 14 Abs. 5 ASchG).

  • Standard operating instructions from a reviewed template (Austria) from €149.00 net Enquire now
  • Custom-made operating instructions (Austria) from €199.00 net Enquire now
  • Standard operating instructions from a reviewed template (Germany) from €149.00 net Enquire now
  • Custom-made operating instructions (Germany) from €199.00 net Enquire now
  • Translation of your own operating instructions with comprehension test from €39.00 net Enquire now

Typical in manufacturing and metalworking:

  • Lathe and CNC machining centre
  • Eccentric and hydraulic press
  • Overhead crane and lifting accessories
  • Gas-shielded arc welding and oxy-fuel welding
  • Handling metalworking fluids
More about the operating instructions
available

Remote review of your risk assessment

Typical in manufacturing and metalworking:

  • Remote evaluation check: review of your evaluation for production and workshop (Sections 4 and 5 ASchG)
  • Evaluation of working substances for a metalworking fluid, welding or another substance or process
  • Setting up checklists and deadlines for cranes, lifting accessories, presses and industrial doors
Send an enquiry

Legal bases on this page

Questions about your industry?

Tell me what is coming up in your business.