Circular saws, planers and spindle moulders
On the sliding table saw, surface planer and spindle moulder, the hands work close to the running tool. Serious injuries are caused by cuts and by workpieces thrown back by the tool (kickback).
- Use circular saws for rip-sawing wood only if they have a device that prevents the workpiece from kicking back, such as a riving knife or a mechanical feed. Use only riving knives that match the saw blade, with a gap to the saw blade of no more than 8 mm. § 25 Abs. 1 Z 3 und 4 AM-VO
- On surface planers, push the table halves as close together as the work allows, and cover the unused part of the cutter block in front of and behind the fence. On moulding machines, use guards that cover the tool as far as possible. § 25 Abs. 2 Z 1 bis 3 AM-VO
- Comply with the manufacturer's specifications for tools such as saw blades, cutters and drills, in particular maximum and minimum speeds. § 25 Abs. 5 AM-VO
- Young persons must not work on sawing, planing and moulding machines with manual loading, manual removal or manual feed as long as the accident hazards have not been eliminated by suitable guards or protective devices. This is permitted after 18 months of training, with hazard instruction at vocational school after twelve months, and only under supervision. § 6 Abs. 1 Z 1 bis 3 KJBG-VO